Your job is to connect the green wire in the top-left corner with the green wire in the bottom-right corner using the blue and red segments of the cable.
The segments must alternate from red to blue and must run through every single square on the grid.
Two segments of cable are already in place. Use your stylus to move, rotate, and place the red and blue segments on the grid and connect the green wires.
The first cable segment you should connect to the lower-right green wire is the straight red one.
The first segment you need to connect to the upper-left wire is also red, but longer than the one just mentioned.
Can you figure out which one that might be?
The second cable segment you should connect to the lower-right wire is the blue U-shaped one.
The second segment you need to connect to the upper-left wire is also blue and has a curve between the two ends, which face away from each other.
Continuing from the two you've already connected to the lower-right wire, you need to place a red segment and then a blue one shaped a bit like the letter "S".
After that, you'll need a red one, of course, followed by the blue segment that kind of looks like a horizontally compressed letter "J" when rotated.
The blue cable you need to connect to the fixed red segment in the middle is short and points to the left when attached correctly.
From there, you'll need to attach the red J-shaped segment. After that, connect the blue segment that looks like the letter "J" so that it heads toward the left.
Solution
Incorrect
Too bad!
Don't forget the rules...
Correct
Shocking!
It's a pretty complicated path from wire to wire, but everything is connected perfectly.